low frequency wire tuning fork, C3
Datecirca 1893
Inventory NumberWJ0072
ClassificationTuning Fork
Subject
Maker
Anton Appunn
1839 - 1909
Cultural Region
Place of Origin
Dimensions29.5 × 9.7 × 3.9 cm (11 5/8 × 3 13/16 × 1 9/16 in.)
Material
DescriptionTwo brass, concave disks are attached to the ends of steel wire. The wire is shaped as a "U" and mounted in a hollow, wooden handle.
The maker's name, "APPUNN," is stamped on the edges of the disks. The concave sides are stamped, "C3" and "16." The 16 refers to simple vibrations, or vibrations per second.
The maker's name, "APPUNN," is stamped on the edges of the disks. The concave sides are stamped, "C3" and "16." The 16 refers to simple vibrations, or vibrations per second.
SignedAPPUNN
Inscribedon disk: C3 / 16
FunctionAppunn tuning forks were used to test the lower limits of audibility, including the detection of low pitches and frequencies.
Historical AttributesA Harvard account book shows an expenditure of $102.00 for Appunn instruments in June 1893.
Rudolph Koenig
Date: circa 1889
Object number: 1997-1-0884
