clamps on threaded rod
Date1875-1900
Inventory Number2004-1-0014
ClassificationClamp
Subject
Maker
American
Cultural Region
Dimensions54.5 × 7.5 × 6.3 cm (21 7/16 × 2 15/16 × 2 1/2 in.)
Material
DescriptionA nickel-plated steel rod with a threaded base and brass flange currently holds two clamps. One is a blackened brass sleeve with a brass locking screw. Alongside the sleeve are two slender tubes. These may be for inserting slender wires or they may serve as supporting brackets for something that the experimenter doesn't want to slide down the rod.
The other clamp is unusual having a large brass ball through which the rod slides. The base of the ball a brass collar with a knurled locking screw. A hollow pipe extends off at right angles on one side of the ball, but does not connect to the interior of the ball in order to make contact with the rod. At 90 degrees to this pipe is another brass rod that supports a thick brass sleeve at right angles to it.
The other clamp is unusual having a large brass ball through which the rod slides. The base of the ball a brass collar with a knurled locking screw. A hollow pipe extends off at right angles on one side of the ball, but does not connect to the interior of the ball in order to make contact with the rod. At 90 degrees to this pipe is another brass rod that supports a thick brass sleeve at right angles to it.
Signedunsigned
Functionpole for clamping instruments above lab table
Ross and Company
Date: circa 1875
Accessories: Ross oculars (2): C, D; anonymous objective on the tube; Ross objective 1/2 "; standing case
Object number: 1138
Date: 1890-1930
Object number: RS1425a
